Kigali Central Station
Kigali, Rwanda · Sample station
Station online
Sign in
Sample station · Sign in to create your own private workspace

Green Mobility — Station User Manual

Green Mobility & Tours · Station operations, Rwanda All amounts are in RWF. All times are Africa/Kigali (UTC+2).


Part 1 — Getting started

1.1 Create your account

  1. Open the app and select Sign in (top right).
  2. Select Create an account.
  3. Enter your full name, email address and a password, then select Create account.
  4. Open the confirmation email and select the link.
  5. Return to the app and sign in. You can also use Continue with Google.

Before you sign in, the app shows a sample station (Kigali Central Station). Nothing you do there is saved.

1.2 Who sees what

RoleCan use
Manager (whoever sets up the station)Every page
Boss (linked by the manager)All Reports and CSV exports, including full payroll. Cannot change station records or grant access.
Attendant (linked by the manager)Overview (My shifts), Forecourt & shifts, Staff & payroll — own records only. No revenue or pump prices.

1.3 Forgot password

On the sign-in page select Forgot password?, enter your email and follow the email link.


Part 2 — Manager: first-time station setup

Do these steps once, in this order.

Step 1 — Add staff

  1. Go to Staff & payroll → Add employee.
  2. In Add employee enter Full name, Position and Monthly gross (RWF) → Save record.
  3. Repeat for every staff member.

Step 2 — Add tanks

  1. Go to Wet stock → Add tank.
  2. Fill in Tank ID, Fuel (Diesel or Petrol), Capacity (L), Opening book stock (L), Cost per liter (RWF) and Manufacturer calibration points (JSON) → Save record.

What each field means:

  • Tank ID — the name you use on the site, for example T01. One tank holds one fuel only.
  • Fuel — Diesel or Petrol. Add a separate tank for each fuel you sell.
  • Capacity (L) — how much the tank holds when it is completely full. Take it from the tank's data plate or the supplier's drawing. It is the size of the container, not the amount of fuel inside it. The app uses it to show how full the tank is and to check that your calibration chart ends at the right height.
  • Opening book stock (L) — the litres you are starting with on the day you begin using the app. Take it from the last delivery record or from an opening dip. "Book" means the amount on paper; a dip tells you the amount actually in the ground. The difference between the two is the variance, and anything beyond ±0.5% is investigated.
  • Cost per liter (RWF) — what you paid for each litre before VAT. This is the starting value used to work out the cost of fuel sold; every delivery updates it automatically.
  • Manufacturer calibration points (JSON) — the dip chart that comes with the tank, also called a strapping table. It lists dip-stick readings in millimetres and the litres each reading means. Enter the points in order from empty to full:
    • start at 0 mm = 0 L;
    • end at the tank's full height and its capacity;
    • example for a 30,000 L tank that is 2,000 mm tall: [{"mm":0,"liters":0},{"mm":1000,"liters":15000},{"mm":2000,"liters":30000}]. Every dip you record is turned into litres using this chart, so a reading outside the chart is refused. Copy the points from the manufacturer's document — do not invent them, because a wrong chart gives wrong litres.
  1. Add one tank for each fuel you sell.

Step 3 — Add pumps (meters)

  1. Go to Forecourt & shifts → Add pump.
  2. In Add a pump enter Pump ID (e.g. P01), Fuel, Opening totalizer (L) and Unit price (RWF) → Save record.
  3. You need at least two Diesel and two Petrol meters to run a shift with two staff.

Step 4 — Confirm VAT and accounting

  1. Go to Accounting.
  2. Under VAT treatment, choose the Fuel retail treatment (Exempt, Zero-rated or Standard) and the Standard VAT rate (%).
  3. Select Confirm VAT policy. Shifts cannot be settled until this is confirmed.

Step 5 — Give staff access

  1. Ask each attendant to create an account (Part 1.1).
  2. Go to Settings → Staff access.
  3. Enter their email, choose Attendant under Access role, choose their name from the employee list → Give attendant access.
  4. For a boss, choose Boss — reports only under Access role, enter their account email → Give boss report access. No employee record is needed. They must create an account first.
  5. To stop access later, select Remove next to their name.

Part 3 — Running a shift (managers and attendants)

Shifts: Day 06:00–18:00, Night 18:00–06:00. Only one shift can be active at a time.

Step 1 — Start the shift

  1. Go to Forecourt & shifts → Start shift.
  2. In Start staffed shift, for each Staff member choose a Diesel meter and a Petrol meter. You need at least two staff; use Add shift staff for more. A meter can only belong to one person.
  3. Select Start shift. Opening meter readings are taken automatically from the last shift's closing readings.

Step 2 — Meter photo / GPS check (optional, recommended)

  1. In Meter photo / GPS audit (bottom of Forecourt & shifts), choose the Pump and take or upload a Meter photo.
  2. The system reads the number from the photo into Reviewed closing meter (L). Check it and correct it if needed.
  3. Select Capture GPS to add your location.
  4. Select Confirm & save audit evidence. Saved records can't be edited; use the photo icon to view a saved photo.

Step 3 — Close & settle the shift

  1. Select Close & settle.
  2. For each meter enter the closing meter reading and any pump test liters (fuel pumped back into the tank for testing).
  3. Enter money collected: Cash, MTN MoMo, Airtel Money, POS / Card, Credit customers.
  4. If cash is short:
    • Choose the responsible attendant (one person; the shortage is not split).
    • Choose the payroll month the amount comes off their pay.
    • Write a reason for the shortage.
    • Attendants always choose a responsible person, because they can't see the expected total. That person is charged only if cash is actually short.
  5. Select Confirm settlement. The shift becomes Reconciled, and closing readings become the next shift's opening readings.

Saved shift meters, operators and assigned shortages cannot be changed afterwards.


Part 4 — Manager: daily tasks

4.1 Wet stock

  • Dip reading: Wet stock → Tank reconciliation → Record dip on the tank's row → enter Dipstick reading (mm) → Save record. Liters are calculated from the calibration chart.
  • Fuel delivery: Record delivery → choose Tank, enter Supplier, Invoice / delivery note, Invoice quantity (L), VAT-inclusive unit cost (RWF), Recoverable input VAT (Exempt / Zero-rated / Standard), Before dip (mm) and After dip (mm) → Save record. The average cost per liter updates automatically.
  • Watch the dip variance — anything beyond ±0.5% should be investigated.

4.2 Expenses

  1. Expenses → Add expense.
  2. In Record an expense enter Description, VAT-inclusive amount (RWF), Recoverable input VAT, Category, Payment source (Shift Cash Drawer, Petty Cash, Bank, MoMo) and Frequency → Save record. Recoverable VAT is posted separately.

4.3 Shortages

  • Review Attendant shortages on the Forecourt & shifts page.
  • Assign deduction for any shortage still marked Unassigned: choose Responsible attendant, Deduct in payroll month and Reason for shortage → Save record.
  • Add / Edit reason at any time while the year is open.

Part 5 — Manager: monthly payroll

  1. Go to Staff & payroll and choose the payroll month.
  2. Check the estimate: gross, PAYE, pension (6%), maternity (0.3%), CBHI, shortage deduction, net pay and employer contributions.
    • A shortage deduction never makes pay negative; any amount left over shows as Unrecovered shortage.
  3. Pay staff through your bank or MoMo as usual.
  4. Then select Record salary payments, tick the staff paid, choose Payment source (Bank or MTN MoMo), Payment date and Payment reference → Confirm payment records.
    • This only records the payment and creates the accounting entries — it does not send money.
    • A staff member cannot be recorded twice for the same month.
  5. Use Export CSV for your records. Tax figures are estimates — confirm with RRA / RSSB before filing.

Part 6 — Manager: accounting and year end

All of this is on the Accounting page.

6.1 Other postings

Under Additional accounting postings, enter Date, Account, Description, VAT-inclusive amount (RWF) and Payment source → Post transaction. Use this for items not entered elsewhere, such as income tax.

6.2 Bank & mobile-money matching

  1. Under Bank & mobile-money matching, choose the Collection channel (MTN MoMo, Airtel Money, POS / Card or Cash).
  2. Under Statement CSV, choose your statement file (CSV only, under 5 MB, dates as YYYY-MM-DD, amounts in RWF).
  3. Check the date column, reference column and amount column that appear (they are picked automatically when the headings contain "date", "ref" and "amount") → Import statement.
  4. In the table, each line shows Match … buttons for shift collections on the same channel, with the same amount, within 7 days. Select the right one. Lines with no match show Unmatched (for example fees or partial payouts).
  5. Export reconciliation downloads the result.

6.3 Annual closing

  1. Under Annual closing, enter the Financial year (only past years). The unclosed profit for that year is shown.
  2. Select Review year-end close, read the warning, then Confirm annual close (or Cancel).
  3. Profit or loss moves to Retained earnings. Close one year at a time, with no active shift.
  4. After closing, nothing dated in that year can be added or changed. This cannot be undone.

6.4 Reports

Managers and linked bosses can open Reports. The Overall report opens first: choose Daily, Weekly (Monday–Sunday) or Monthly, then choose a Report date in that period. Review sales, reconciled shifts, shortages, overages, expenses, salary payments, fuel and collection breakdowns, posted accounting totals and bank matching. Export overall CSV downloads the summary and its shift, expense and payment details. Export PDF downloads a paginated document for the same selected period.

Only reconciled shifts count as sales; shifts use their recorded shift date, while expenses, salary payments and statement lines use their transaction date. Accounting totals use posted entries and exclude annual closing transfers. Current tank stock is not a historical period balance.

Choose another Report for Shifts, Wet stock, Expenses, Payroll, Salary payments, Accounting, Bank matching or Annual closing. For Payroll, choose the Payroll month. Export CSV or Export PDF downloads the selected report. Payroll PDFs remain draft estimates, not approved statutory filings. Bosses see all station staff and financial records here, but cannot add or change records.


Part 7 — Attendant quick guide

  1. Sign in with the account your manager linked.
  2. Overview → My shifts shows your active shift and past shifts.
  3. Forecourt & shifts: start a shift you work on, take meter photos, and close & settle it (Part 3).
  4. Staff & payroll: see your own pay and any shortage deducted from you.
  5. Other pages show Manager access only.

Part 8 — Troubleshooting

MessageWhat to do
"Close and reconcile before starting another shift"Settle the active shift first.
"Unable to save. Refresh if another window changed these records"Someone else saved first. Refresh the page and enter again.
"Choose the responsible attendant for the shortage"Cash is short — pick one person on the shift.
"Dip reading is outside the calibration chart"Re-check the dip, or the tank's calibration chart.
"Manager access only"Ask your manager.
"No account uses that email"The staff member must create an account first.
Closed-year messageThat year is closed; record the item in an open year.
© 2026 Green Mobility & ToursAll amounts in RWF · Africa/Kigali (UTC+2)